• Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine
  • Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine
  • Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine
  • Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine
  • Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine
Model No.︰Q11
Brand Name︰Besco
Country of Origin︰China
Unit Price︰CNY ¥ 10000 / pc
Minimum Order︰1 pc
Share on:

 Total 20 Related Items 
Prev1314151617Next

Product Description
The Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine is of all-steel welded structure. Simple structure with good appearance.
The Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine is easy to operate, with low energy consumption.
This Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine is widely used for medium and thick steel sheet forming in the light machine industry, hardware manufacture.
The blade is made by special steel.
Model
 Q11-4 x 2500
 Q11-2 x 2000
 Q11-3 x 1300
 Max. cutting material
 Mild steel
 mm
 0.5~4
 0.5~2
 0.5~3
 Stainless steel
 mm
 0.5~2
 0.5~1
 0.5~1.5
 Cutting length
 mm
 2500
 2000
 1300
 Cutting angle
 °
 1.5°
 1° 30'
 1°30'
 Cutting
 Per minute
 18Per minute
 18Per minute
 18Per minute
 Dimension
 L.
 mm
 3500
 2800
 2100
 W.
 mm
 1500
 1260
 1260
 H.
 mm
 1450
 1300
 1300
 Weight
 kg
 2100
 1350
 1000
 Main motor
 kw
 5.5
 3
 2.2


   The machine used is called a Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine. The Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine may be foot powered (or less commonly hand powered), or mechanically powered. The Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine works by first clamping the material with a ram. A moving blade on the plate shearing machine then comes down across a fixed blade to shear the material. For larger plate shearing machine the moving blade may be set on an angle or "rocked" in order to shear the material progressively from one side to the other; this angle is referred to as the shear angle of plate shearing machine. This decreases the amount of force required, but increases the stroke. A 5 degree shear angle on plate shearing machine decreases the force by about 20%. The amount of energy used on the Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotineis still the same. The moving blade on the Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine may also be inclined 0.5 to 2.5°, this angle of the plate shearing machine is called the rake angle, to keep the material from becoming wedged between the blades, however it compromises the squareness of the edge of the plate shearing machine. As far as equipment is concerned, the plate shearing machine consists of a shear table, work-holding device, upper and lower blades, and a gauging device. The shear table is the part of the plate shearing machine that the workpiece rests on while being sheared. The work-holding on the plate shearing machine device is used to hold the workpiece in place and keep it from moving or buckling while under stress. The upper and lower blades of the plate shearing machine are the piece of machinery that actually do the cutting, while the gauging device of the plate shearing machine is used to ensure that the workpiece is being cut where it is supposed to be. 

  The design of Motor-Drive Plate Shearing Machine/ Plate Cutting Machine/ Mechanical Guillotine tools is an engineering compromise. A sharp edge, strength and durability for the plate shearing machine are ideal, however a sharp edge is not very strong or durable so blades for metal work tend to be square-edged rather than knife-edged. Typical workpiece materials cut by the plate shearing machine include aluminum, brass, bronze, and mild steel because of their outstanding shearability ratings, however, stainless steel is not used as much due to its tendencies to work-harden.
 
   Other types of geometrical possibilities of the plate shearing machine include the squaring shear, angle shear, bow-tie shear and bar shear. All of these have
Payment Terms︰T/T
Product Image






Related Products
pittsburgh forming machine/lock forming machine/lock former
pittsburgh forming machine/lock forming machine/lock former
US $ 5300
duct manufacturing auto line III
duct manufacturing auto line III
US $ 28500
slitting line and cut to length line
slitting line and cut to length line
US $ 100000
press brake toolings/press brake moulds/press brake dies
press brake toolings/press brake moulds/press brake dies
US $ 200




Home  |  Product Catalog  |  News  |  Contact Us  |  Sitemap  |  Mobile Version

Powered by DIYTrade.com? Build your FREE website !
Find Best Price For China Products !

与女神同行 电影|未来影院|网友自拍区|成为人视频免费视频免费观看 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>